PDAdb.net
infinitely detailed

 

FacebookGoogle PlusRSS FeedTwitter







Samsung GT-i9210 Galaxy S II LTE EU (Samsung Celox)

Collapse datasheetExpand datasheet | Add this item to the comparisonAdd to compare

General Attributes

BrandBrand name of the device. This may match with the manufacturer Samsung
ModelOne or more (separated by /) specific model name identifies this device GT-i9210 Galaxy S II LTE EU
ReleasedOfficial release date 2012 Apr
Hardware designerThe company which designed this device Samsung Electronics
ManufacturerThe company which produces this device Samsung Electronics
CodenameThe codename internally identified the design project of this device Samsung Celox
Device CategorySmartphone, tablet, smart watch, PDA, palmtop, etc. SmartphoneCallular voice-capable usually touchscreen mobile computer which natively runs third-party apps.
Market RegionsRegions where the device was officially sold.  Overlap is possible. Europe

Physical Attributes

WidthWidth is horizontally measured between the left and right edges of device according to the default display orientation 68.8 mm
HeightHeight is vertically measured between the bottom and top edges of device according to the default display orientation 129.8 mm
DepthDepth or thickness is usually the smallest dimension of the device 9.49 mm
DimensionsAll dimensions are maximal values (measured between the furthest points of the device) in closed state 2.71x5.11x0.37 inches
MassThe mass of the device including standard battery and stylus (if any and it can be inserted into the device) measured in grams 130.5 g
4.6 ouncesThe mass of the device including standard battery and stylus (if any and it can be inserted into the device) measured in ounces

Software Environment

Operating SystemPre-installed (usually embedded) operating system which the device was released with. Google Android 2.3.7 (Gingerbread)Google Android 2.3.7 (Gingerbread)

Application processor, Chipset

CPU ClockFrequency of the square signal which schedules the internal operation of microprocessor (synchronous sequential logic). The current consumed by the processor is approximately proportional to clock rate. 1500 MHz
CPUManufacturer part number and most important characteristics of the IC which includes the main application processor or processors Qualcomm Snapdragon S3 APQ8060, 2011, 32 bit, dual-core, 16 Kbyte I-Cache, 16 Kbyte D-Cache, 512 Kbyte L2, 45 nm, Qualcomm Adreno 220 GPUQualcomm Snapdragon S3 APQ8060, 2011, 32 bit, dual-core, 16 Kbyte I-Cache, 16 Kbyte D-Cache, 512 Kbyte L2, 45 nm, Qualcomm Adreno 220 GPU

Operative Memory
RAM TypeType of volatile memory IC which specifies RAM architecture, timing characteristics, refresh mode, voltage levels and physical design of the IC. Two major types of random-access memory is static RAM (SRAM) periodically refreshed dynamic RAM (DRAM). LPDDR2 SDRAM
RAM Capacity (converted)RAM capacity in binary bytes (KiB: 1024 bytes, MiB: 1024 KiB, GiB: 1024 MiB) 1.00 GiB RAM

Non-volatile Memory
Non-volatile Memory TypeType of NV memory IC which determines storage technology, programming / erasing method and write endurance Flash EEPROM
Non-volatile Memory Capacity (converted)The value of ROM capacity converted to the most appropriate units (KiB: 1024 bytes, KB: 1000 bytes, MiB: 1024 KiB, MB: 1000 KB, GiB: 1024 MiB, GB: 1000 MB) 16.0 GB ROM
Total non-volatile user storageThe sum of primary and secondary user-accessible partition of non-volatile storage spaces 14300 MiB total user storage

DisplayAll parameters that related to display

Display ResolutionHorizontal and vertical resolution of the primary display 480x800
Display DiagonalThe distance measured between the furthest corners of the display 114.8 mm
4.5 inch
Horizontal Full Bezel WidthDefined as the sum of width of left and right vertical display bezels. If the display panel is located in the middle width of left and right bezels are the same and their width is the half of the full bezel width. 9.74 mm
Display Area UtilizationDisplay area per front panel area ratio 65%
Pixel DensityIndicates the number of pixels per inch 206 PPI
Display TypePossible options: Color/ monochrome e-ink, STN, PM-OLED, AM-OLED, TN-TFT, IPS TFT, ASV TFT, MVA TFT, PVA TFT, PLS TFT, etc. Color AM-OLEDColor AM-OLED (Active Matrix - Organic Light-emitting Diode) display techology.
Display SubtypeBrand name of the subtype/technology of the screen like Super AMOLED, SLCD2/3/5, Retina Display, Reality Display, ClearBalck, etc. Super AM-OLEDSuper AM-OLED is an improved type of AM-OLED display technology developed by Samsung where touch-sensitve layer is integrated into the screen. Super AM-OLED uses Samsung PenTile matrix RGBG subpixel arrangement (2 subpixels)
Number of Display Colors/ScalesMaximal number of displayable colors or scales 16.8M
Display Subpixel SchemeSpecifies how and how many subpixels are pixels consists of. Possible schemes: RGB, RGBG, RGBW, PenTile, Diamond Pixel, etc. RGBG PenTile MatrixPenTile RGBG is a subpixel rendering sceme developed in 1999. In a PenTile matrix each pixel has 2 subpixels. Green subpixel is shared with neighboring pixels so the pixel density can be higher but image quality is lower than RGB's.
Scratch Resistant ScreenPossible types: Gorilla Glass generations, DragonTrail/X, Sapphire Glass, etc. No

Graphical Suybsystem
Graphical ControllerManufacturer and part number of the graphics controller IC or commercial name of the intellectual property (IP) if the graphics controller is the part of a chipset Qualcomm Adreno 220

Audio/Video Interfaces
A/V OutAudio/Video outputs form a heterogeneous group of interfaces that allow the user to connect the device to various external analog/digital multimedia devices (monitors, projectors, HD TVs) and play multimedia content. For example: MHL, DisplayPort, HDMI, e MHL 1.0First release of Mobile High-Definition Link, the MHL 1.0 was published in June 2010 as a new HD audio/video interface for mobile devices.
micro-USBPhysical interface of the A/V out port. For example: HDMI D, USB-C, micro-USB or DB25

Audio Subsystem

Microphone(s) stereo
Loudpeaker(s) mono

Cellular Phone

Supported Cellular NetworksList of supported cellular networks with band names. For example GSM900 refers to the GSM system with the 890-915 MHz uplink and 935-960 downlink bands. GSM850GSM850 phones support GSM 850 MHz band (downlink: 869.2 MHz - 894.2 MHz, uplink: 824.2 MHz - 849.2 MHz) , GSM900GSM900 phones support P-GSM (Primary GSM) 900 MHz band (downlink: 935.0 MHz - 960.0 MHz, uplink: 890.0 MHz - 915.0 MHz) and may support E-GSM (Extended GSM) 900 MHz band (downlink: 925.0 MHz - 960.0 MHz, uplink: 880.0 MHz- 915.0 MHz. , GSM1800GSM1800 phones support GSM / DCS / PCS 1800 MHz band (downlink: 1805.2 - 1879.8 MHz, uplink: 1710.2 - 1784.8 MHz)., GSM1900GSM1900 phones support PCS 1900 MHz band (downlink: 1930.2 - 1989.8 MHz, uplink: 1850.2 - 1909.8 MHz) , UMTS850 (B5)UMTS850 phones support UMTS 850 MHz (CLR, also refferred as UMTS Band V) band (downlink: 871.4 - 891.6 MHz, uplink: 826.4 - 846.6 MHz), UMTS900 (B8)UMTS900 phones support UMTS 900 MHz (UMTS Band VIII) band (downlink: 927.4 - 957.6 MHz, uplink: 882.4-912.6 MHz), UMTS1900 (B2)UMTS1900 phones support UMTS 1900MHz (PCS, also refferred as UMTS Band II) band (downlink: 1932.4 - 1987.6 MHz, uplink: 1852.4-1907.6 MHz), UMTS2100 (B1)UMTS2100 phones support UMTS 1900 / 2100MHz (IMT, also refferred as UMTS Band I) band (downlink: 2112.4 - 2167.6 MHz, uplink: 1922.4-1977.6 MHz), LTE1800 (B3)LTE1800 phones support LTE 1800 MHz (LTE Band 3) band (downlink: 1805 - 1880 MHz, uplink: 1710 - 1785 MHz), LTE2600 (B7)LTE2600 phones support LTE 2600 MHz (LTE Band 7) band (downlink: 2620 - 2690 MHz, uplink: 2500 - 2570 MHz), LTE800 (B20)LTE800 phones support LTE 800 MHz (LTE Band 20) band (downlink: 791 - 821 MHz, uplink: 832 - 862 MHz)
Supported Cellular Data LinksList of supported cellular data links and rates. GPRSGeneral Packet Radio Service, GPRS C12, EDGEEnhanced Data Rates for GSM Evolution also known as Enhanced GPRS (EGPRS), EDGE MSC12, UMTSUniversal Mobile Telecommunications System. UMTS Release '99 data link layer, W-CDMA grants up to 384 kbit/s pocket-switched download speed., HSDPAHigh-Speed Downlink Packet Access is a 3.5G UMTS downlink protocol., HSPA+ 21.1, HSUPAHigh-Speed Uplink Packet Access is a 3.5G UMTS uplink protocol., HSUPA 5.8, LTELTE (Long Term Evolution) or the E-UTRAN (Evolved Universal Terrestrial Access Network), introduced in 3GPP R8, is the 4G access part of the Evolved Packet System (EPS)., LTE 100/50LTE 100.8 Mbps / 50.4 Mbps (Cat. 3)
SIM Card SlotSupported Subscriber Identification Card (SIM) Format like mini-SIM, micro-SIM, nano-SIM, embedded SIM, etc. Yes
Complementary Phone ServicesPossible extras: voice transmission, voice speaker, vibration, speakerphone, active noise cancellation, PTT, HD Voice, VoLTE, etc. Voice transmissionDevice is able to receive and transmit voice over cellular network, Voice speakerDedicated voice speaker is located near to the ear when talking and optimized for the spectrum and peak-to-peak range of the human voice., Vibrate, Speakerphone, ANC
SAR (head)Measured SAR value at head configuration 0.300 W/kg
SAR (body)Measured SAR value at body onfiguration 0.850 W/kg

Secondary Cellular Phone
Sec. Supported Cellular Networks No

Control Peripherals

Touchscreen TypeDetermines how the touchscreen module senses the touch of the screen Capacitive multi-touch
Touchscreen Simultaneous Touch PointsDetermines how many touches the touch-sensitive screen module is able to simultaneously detect Yes

Communication Interfaces

Expansion InterfacesNon-volatile memory and/or I/O expansion interfaces. For example: microSD, microSDXC, SDHC, CF II., PCMCIA III., etc. microSDSupports memory cards with capacity of up to 2GB and may comply with some (not HC) memory cards with higher capacity than 2GB  , microSDHCA micro-SDHC-capable device supports High Capacity (SD 2.0/HC) memory cards with capacity of up to 32GB., TransFlash
USBUSB is a common high-speed serial bus standard that allows data and power transfer between the mobile device and another computer. Version of USB identifies USB standard. USB 3.0Released in November 2008, USB 3.0 specification introduced USB SuperSpeed enabling devices to communicate at 5 Gbit/s data rate.
USB Speed Rate:  USB HS (480 Mbps)
USB ServicesPossible services: USB power supply, USB charging, USB fast charging, USB host, OTG, etc. USB HostUSB host devices are capable of controlling USB client devices, like mass storage devices, mouse, keyboard, camera, printer, scanner, etc., USB OTG 1.3, USB power supplyDevice which meets USB Battery Charging Specification Revision 1.1 is able to supply current from 500 mA to 1.5 A for the client device., USB chargingThe device is able to charge its battery supplied from the USB port.
USB Connector:  USB Micro-AB
BluetoothIEEE 802.15 is a short-range radio technology standard that allows transfer of data, and the use of accessories such as wireless audio devices and printers. This field specifies the supported BT version. Bluetooth 3.0
Wireless LANWireless LAN / WLAN / Wi-Fi: 802.11 defines a medium-range wireless data link that allows for internet access and data transfer. This field enumerates the supported protocols (like 802.11n). 802.11a, 802.11b, 802.11g, 802.11n
Wireless ServicesPossible extras: Miracast, DLNA, WiFi Tethering, UPnP, WiFi Display, AirPlay, etc. DLNADLNA (Digital Living Network Alliance) over Wireless LAN
NFCNear Field Communication is short-range wireless radio data exchange technology based on radio-frequency identification (RFID). Yes

Multimedia Broadcast

FM Radio Receiver No

Satellite Navigation

Complementary GPS ServicesPossible extras: S-GPS, A-GPS, Geotagging, TMC, QuickGPS, QZSS, etc. A-GPS, Geotagging
Supported GLONASS protocol(s)GLONASS is a global satellite  navigation system operated by Russia. Yes

Built-in Digital CameraPrimary camera usually has better imaging capabilities than secondary camera if any

Camera PlacementRefers to the placement of the primary camera on the device Rear
Camera Image SensorRefers to the semiconductor technology of image sensor CMOSComplementary MOS circuit
Number of pixels 8.0 MP cam
Optical ZoomA feature that changes the focal length of the lens of a camera. Optical zoom requires the lens to move in and out, providing high-quality close ups from a distance 1 x
Digital ZoomDigital zoom is an image signal processing method which cuts out and enlarges a desired part of the captured image while losing the rest of the image 8 x
FocusPossible focus methods: fixed focus, manual focus, CD AF, PD AF, LASER AF, etc. CD AFContrast-detection (CD) is a passive autofocus method without distance measurement which adjusts the optical system until maximum contrast is measured through the lens.
Camcorder Resolution 1920x1080 pixel
30 fps
Built-in FlashA flash is used to brighten dark areas when taking photographs; is also used as a flashlight single LEDAlso known ad mobile light
Camera Extra FunctionsPossible extras: 3D photo,  EIS, EIS (video), OIS, Face detection, HDR photo, HDR video, Macro mode, Panorama Photo, Red-eye reduction, Refocus, Smile detection, Slow motion video, etc. Macro modeAn autofocus feature that allows for close-up photographs to be taken with the onboard digital camera

Built-in Secondary Digital CameraWidely used for video telephony or taking selfies

Secondary Camera Placement Front
Secondary Camera Sensor CMOSComplementary MOS circuit
Secondary Number of pixels 1.9 MP sec. cam
Secondary Optical Zoom 1 x

Power Supply

BatteryBattery technology Lithium-ion polymer
removablePossible options: removable, built-in
Nominal Battery Capacity 1850 mAh

Ingress Protection

Protection from solid materialsIngress Protection Standards. IP First digit: Protection from solid objects or materials Yes
Protection from liquidsIngress Protection Standards. IP Second digit: Protection from liquids Yes

Built-in Sensors

Built-in compassBuilt-in electroinc compass types: 1D, 2D, 3D Yes
Built-in accelerometerAn internal component that senses acceleration components of the device.  Used for automatic screen rotation and for games and applications that rely on acceleration measurement  on X, Y, and Z axis. Possible types: 1D, 2D, 3D Yes
Additional sensorsBuilt-in ambient (barometer, temperature, altimeter, light, etc.), biometric (fingerprint, HR, step, etc.) and comfort (hall sensor, gesture sensor, proximity, etc.) sensors Light intensity sensorBy measuring the intensity of the ambient light device may control the brightness level of the screen, Proximity sensorBased on this sensor signal device may control the volume of the voice speaker or dim the display during a call

Datasheet Attributes
Data IntegrityData integrity level determines the integrity of the published information. Final datasheets are not intended to be modified in the future, preliminary ones can be based on unofficial information or speculations, incomplete ones are also preliminary b Final
AddedThe exact time of the datasheet addition 2012-02-23 22:38